What is the best Ender 3 motherboard upgrade? One of the most important components of your 3D printer is its motherboard. The motherboard controls all the functions and servos so that you can print a design without any complications. If you want to print a high-quality object, then your motherboard must be up to par with what other printers are using. This article will analyze some of the best motherboards on the market for Ender 3s and provide an honest opinion about which one might be right for you.
There are many different types of motherboards available for Ender 3s, but we recommend going with either a RAMPS or RUMBA board depending on your needs and budget. For beginners who just want to get something that works without spending too much money, we recommend RAMPS boards. If you want to have more control over your printer’s functions and memory capabilities, then RUMBA boards are probably the best option.
- Creality new release silent motherboard V4.2.7 to 32bit, compatible with Ender 3 Pro.
- Super quiet by TMC2225 driver , bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
- Firmware comes pre- installed, pre-configured for the Ender 3 Pro, makes it totally plug & play.
- This silent motherboard preinstalls the Ender-3 Pro firmware. If you want to install it in your Ender 3/Ender 3 v2/Ender-5, need to flash the Ender 3/Ender 3 v2/Ender-5 firmware.
- 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
- 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
- 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
- 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
- Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3 Pro. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from official website.
- Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
- Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
- Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
- Performance Upgrade - creality 4.2.7 32-bit creality 4.2.7 silent mainboard, compared to the old V1.1.5 with only 8-bit, can drive more hardware to run, load files easily, print more smoothly, and run significantly faster. ESD electrostatic protection avoids the electrostatic adsorption of dust on the silent motherboard, so that the ender 3 board upgrade can run normally. Through the USB port, it can be used with E/Z/Y/X axis motors.
- Ultra Quiet Driver - TMC2225 driver for ender 3 silent board Marlin 2.0.1 is super quiet, supports TF card, bootloader is preinstalled. TMC's high noise reduction and ultra-quiet motor driver chip design keeps the 4.2.7 silent board running at a low decibel (<50dB). High-quality MOS tube, high input impedance, low noise, good thermal stability, fully enclosed inductor material.
- Full-Featured - We have 5 spare fuses to prevent the ender 3 motherboard from being burned out, and equipped with a broken material detector to support the broken material detection function.The dedicated power management chip supports 110V to 24V to drive the ender 3 motherboard upgrade to run normally. There is a mark on each cable, just look for the interface corresponding to the new silent motherboard.
- Widely Compatible - ender 3 board come pre-installed with Ender-3 firmware and are only plug-and-play compatible with Ender-3 3D printers. If you install and use it in Ender 3 Pro/Ender3 v2/Ender 5/Ender 5 Pro, you need to update the firmware corresponding to Ender 3 Pro/Ender 3 v2/Ender 5/Ender 5 Pro. There are firmware download instructions in the manual. All-round heat dissipation design can effectively solve the problem of heat generation.
- Update Firmware - Copy the firmware file to a formatted SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card and power cord, then turn on the printer and wait 10 seconds for the firmware update process to complete. Install the creality silent board first and then flash the firmware. Be sure to flash the mute system into the printer, otherwise the touch screen will fail, the screen will be abnormal, and the function will not work.
- F1RST LAYER is an authorized distributor of Creality And Antclabs. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support you need, done right, the F1RST time! Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listing’s photos when installing!
- Ender 3 users can use the Ender 3 Pro firmware already flashed onto the board OR update it with Ender 3 firmware. IF YOU ALREADY HAVE A BLTOUCH or filament runout sensor then you WILL have to update the firmware. THE INSERT CARD THAT COMES WITH THIS PRODUCT HAS A URL LINK WHERE YOU CAN FIND ALL OF OUR FIRMWARE. The process of replacing your board and flashing the firmware will take less than 1 hour and will quickly turn your stock Ender into a multi-featured high end printer in just one upgrade!
- This color screen improves UI and user experience by offering a more refined display and rotating knob for straightforward menu navigation. The V2 Screen also provides a feeling of substantial added value to older model printers. This color screen is certain to brighten your day. IF YOU ALREADY HAVE A BLTOUCH or filament runout sensor then you WILL have to update the firmware (please see the product description). Firmware updates takes roughly 2 minutes to complete.
- This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32 Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates. This board also has support for a BL Touch and/or filament run out sensor.
- If you do ALREADY have a Bltouch and/or a filament runout sensor then please update your firmware using the link in the Product description. This folder also contains wiring diagrams for the 4.2.7 board and other accessories you may already have such as a Bltouch and/or a filament runout sensor. We are here to help you every step of the way, so if you encounter any difficulties or have any queries whatsoever then please message us directly.
- Super Silent Driver: This ender 3 Pro silent mainboard adopts TMC2225 drivers, which can reduce the stepper motor noise greatly.
- Thermal Runaway Protection：The controller board is optimized by circuit, effectively solve the Heating Problem.
- Upgraded V4.2.7 silent mainboard is 32 bit but the V1.1.5 is only 8 bit.It printing smoother and the running speed is obviously accelerated.
- The V4.2.7 mainboard firmware（32 bit）has been flashed before shipping, it does not need an ISP cable and ISP pinboard anymore, which makes it totally plug & play.
- NOTE : ONLY compatible with Ender 3 Pro.If you wanna install this board to Ender 3/Ender 5, you will need to flash the firmware. If you do not have the firmware please contact us!
- Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3 Pro. If you want to install it on Ender-3 v2 or Ender-5, please flash Ender-5 firmware. You can download firmware from official website.
- Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
- Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
- Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
- This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates.
- The silent fan is intended for use as the hotend cooling fan. The wires are 1 meter long and can reach the control board. Alternatively, the fan can be spliced with the stock fan wires (see product description). The 4.2.7 board is compatible with ALL Ender Series printers as a direct swap for older model v1.1.5. The board is flashed with Ender 3 Pro firmware that works flawlessly on the Ender 3. Ender 3 V/5 users must update firmware (see product description). Firmware update takes 3 minutes.
- The silent fan included is intended for use as the hotend cooling fan. The wires on this fan are too short and need to be spliced with original fan wires to be long enough to reach the control board. Compatible with ALL Ender Series printers as direct swap for older model v1.1.5. If using with Ender 3 OR Ender 5 Please flash the proper firmware for your printer. This is a very simple 3 minute process and there is an extensive video guide for the entire process. Links in the description.
- Compatible with Ender Series printers as direct swap for older model v1.1.5. All wiring positions are identical and match with each board making for a simple install. The drastic difference will be noticed immediately as this board eliminates almost all noise from the stepper motors making the printer inaudible from any other room in your home or apartment. If you have wish to update the boards firmware then please follow instructions on the insert card that comes with this product.
- F1RST LAYER is an authorized distributor of Creality And Antclabs. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support. Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listing’s photos when installing! FIRMWARE LINK IN PRODUCT DESCRIPTION!
- Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from Official website.
- Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
- Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
- Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
- Creality new release silent motherboard V4.2.7 to 32bit, compatible with Ender 3 Pro.
- Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
- Firmware comes pre-installed, pre-configured for the Ender 3 Pro, makes it totally plug & play.
- This silent mainboard preinstalls the Ender-3 Pro firmware. If you want to install it in your Ender 3/Ender 3 v2/Ender-5, need to flash the Ender 3/Ender 3 v2/Ender-5 firmware.
- New Version: This is the newest Silent Controller board for Creality 3D printers
- Driver:TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable.
- Thermal runaway protection is enabled.The Board is Optimized by Circuit ,effectively solve the Heating Problem.
- Easy to Operate:With USB Port,can be Worked with E/Z/Y/X Axis Motor Fimware 1.1.8 comes pre-installed on this board.Suitable for Ender-3 /Ender3 Pro.
- Creality new release silent motherboard V4.2.7, 32bit,compatible with Ender 3 V2
- Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
- Firmware comes pre-installed, pre-configured for the Ender 3 v2, makes it totally plug & play.
- This silent mainboard preinstalls the Ender 3 V2 firmware. If you want to install it in your Ender 3 /Ender3 Pro/ Ender-5, need to flash the Ender 3 /Ender 3 Pro/Ender-5 firmware.
- Upgrade Replacement: This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others.
- Thermal Runaway Protection: Optimized circuit, enabling thermal runaway protection to effectively solve heating problems.
- Eeay to Operate: With USB Port, can be Worked With E/Z/Y/X Axis Motor.
- Comes with a Fan: 4010 Axial Cooling Fan 24V 7000r/min，L150mm with 2.5 Terminal fit for all ender series.
- Note: It has the free unified firmware preconfigured for Ender-3. If you wanna install this board to Ender-3 Pro /Ender-5, you will need to flash the firmware. If you do not have the firmware please contact us!
- Suitable for Ender 3 Pro; Silent function Customized and Non-standard matching.
- The TMC2225 driver is super quiet.
- Firmware comes pre-installed, and pre-configured for the Ender 3 Pro, making it totally plug & play.
- It can work with Ender 3/Ender 3 v2/Ender-5 3D Printer. PLEASE NOTE: You need to flash firmware for your printer if you install this board on those printers. You can download firmware from the official website or contact us for related firmware.
- If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- ❤【New Upgraded ender 3 silent board】Germany imported TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB). When you are in a quiet environment, you can safely and boldly perform 3D printing operations without apologizing, and you never need to worry about noise disturbing others.Creality V4.2.7 32-bit silent motherboard printing smoother and the running speed is obviously accelerated.1 Year Warranty.
- ❤【HUMANIZED DESIGN, EASY TO REPLACE】The 3D printer models compatible with the Ender-3 silent motherboard are: Ender-3/Ender-3 Pro/Ender3 v2/Ender-5.We can choose a silent motherboard for any of these products. Because these models are all DIY models.PLEASE NOTICE: It only pre-installs the Ender-3 firmware, if you want to install it in your Ender-3 Pro/Ender3 v2/Ender-5, you need to install the corresponding firmware.DO NOT TRY RANDOMLY.If you need the firmware, please contact us freely.
- ❤【DRIVER】TMC2225 drivers.Marlin 2.0.1 and bootloader installed. You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.The Board is Optimized by Circuit, effectively solve the Heating Problem.Support 24V input voltage.With USB Port, can be Worked With E/Z/Y/X Axis Motor.
- ❤【SUPER SILENT DESIGN,WIDE RANGE OF USAGE SCENARIOS】The design of the Ender-3 silent motherboard extends the application scenarios of 3D printers, starting from ordinary manufacturing to indoor places such as homes, offices, research institutes, and especially some relatively quiet public areas.IMPORTANT (at least for Ender 3 V2): If when you turn it on,it starts beeping and does not show anything on the screen, it because you have to update the firmware and check your wiring, then it will work.
- ❤【AFTER SALE GUARANTEE】365 days 100% money back guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is our tireless pursuit. If you are dissatisfied with the product, don't be too quick to leave a negative comment. Contact us! we will get back to solve any issue for you within 12 hours. We will show you a sincere attitude and satisfactory solution.
- 🔻【Main Control Chip Features】This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K.
- 🔻【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on).
- 🔻【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation.
- 🔻【Upgrade Features】Support BLtouch, filament detection, power-off resume, automatic shutdown, etc .; Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- 🔻【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;
- 1)If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;
- 2)Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on);
- 3)Support BLtouch, filament detection, power-off resume, automatic shutdown, etc .;
- 4)Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- 5)The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation;
- This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer and Insanity Automation. The ONLY open source AND Plug-And-Play Ender touch screen on Amazon, flashed at the Creality factory with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!
- A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 (Ender 5 must update board firmware). Along with more added features than any other touch screen available, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen.
- This is the newest version of Creality's 4.2.7 32 Bit silent control board with authentic TMC2225 Trinamic stepper drivers which greatly reduces the sound of the stepper motors during use. The 4.2.7 board comes flashed with our custom Marlin firmware that works with all Ender 3 series printers. This entire hardware swap will take less than 1 hour and quickly turns your stock Ender into a touch operated printer in just one upgrade as well as adding dozens of features over stock Creality firmware!
- The BL Touch is an incredibly accurate and reliable auto-mesh bed leveling sensor that probes individual spots for differences in Z height on any print surface such as glass, aluminum, PEI, BuildTak with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Custom firmware even speeds up this process to further save time while still maintaining accuracy
- First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open-source potential! Enhance your Ender 3 / Pro/ V2/ Max/ 5 with previously unavailable features. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Please contact F1rst Layer directly for any questions or technical support. A filament runout sensor, 24V silent fan and metal carrying handle are also included in this kit.
- Creality original display screen kit for Ender-3 V2,Ender-3 Pro,Ender -3 3D printer
- 4.3-Inch HD color screen.
- 24-bit color HD screen displays clear views in good contrast
- Modular design, easy installation, the screen is tilted to make a wide vision and easy to operate, it can be fixed directly on the 3D printer base.
- It provides sufficient storage space, and supports to store pictures in JPEG compression mode, further increasing the number of stored files.
Ender 3 Motherboard Upgrade Reviews 2023
BIGTREETECH SKR Mini E3 V2.0 Control Board
- 1)If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;
- 2)Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on);
- 3)Support BLtouch, filament detection, power-off resume, automatic shutdown, etc .;
- 4)Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- 5)The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation;
The best Ender 3 motherboard is the BIGTREETECH SKR Mini E3 V2.0 Control Board. It has features such as low on-resistance, larger heat dissipation area, and reduced heat generation. The SKR Mini E3 V2.0 Control Board provides quality design and high-performance standards for the 3D printer motherboard.
This ensures you have a stable 3D printing experience with ease and convenience. The Ender 3 motherboard is compatible with a variety of printers and has been tested for compatibility. It’s easy to attach and works best after being powered on for 48 hours. The control board will also work best if you have the right settings, such as temperature calibration. There are instructions available online that tell you how to properly install the new board. The Ender 3 motherboard is also a good choice if you need something that plugs into other components and allows for an easier connection.
I’ve been using a BIGTREETECH B0882QGFZR SKR Mini E3 V2.0 Control Board for my Ender 3 printer for about two months now, and I’m pretty happy with the way it’s been functioning. The Kapton tape on the build plate sticks to the acrylic glass build plate really well and allows for good adhesion of stickers or other materials that can’t normally adhere to acrylic. The Skr Mini E3 V2.0 Control Board is a very robust board and has an excellent range of features that make any 3D printing session a lot easier.
The backlit LCD screen in the Skr Mini E3 V2.0 Control Board shows your print progress and is useful for all print types. It’s also a good idea to calibrate the heat bed and your hot end before printing. There are various ways to make sure that you have the right settings, but it’s best if you first figure out what kind of prints you plan to do. The Skr Mini E3 V2.0 Control Board is compatible with most printers, and it can handle a range of different types of print quality. The best Ender 3 motherboard will allow you to use your printer at its maximum capacity and will provide the highest level of printing accuracy. You should also make sure that the motherboard fits your printer model before buying because there are different motherboards designed for specific models.
This is the best Ender 3 motherboard I’ve ever seen; it’s a very stable control board that works well and provides excellent results. The LCD screen is bright and easy to read, and I really like the fact that you have an option for both Fahrenheit and Celsius settings in terms of temperature. It’s also important to note that this motherboard is simple to install and can be done in a short time frame. It doesn’t take long before you start getting results, so you won’t have to deal with any sort of frustration when trying to get it started. This best motherboard for Ender 3 will work well if you calibrate your printer bed accordingly, and the control board fits perfectly on the printer.
Pros:
- It’s easy to install and you can start printing right away. You also don’t have to deal with any overheating issues, which is great considering that this motherboard generally works well even when your printer does get a little too hot.
Cons:
- The size of this motherboard makes it difficult to install properly, even if you do follow the installation instructions.
Cregrant New Upgrade Motherboard
- Creality new release silent motherboard V4.2.7 to 32bit, compatible with Ender 3 Pro.
- Super quiet by TMC2225 driver , bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
- Firmware comes pre- installed, pre-configured for the Ender 3 Pro, makes it totally plug & play.
- This silent motherboard preinstalls the Ender-3 Pro firmware. If you want to install it in your Ender 3/Ender 3 v2/Ender-5, need to flash the Ender 3/Ender 3 v2/Ender-5 firmware.
If you’re looking to upgrade the motherboard of your Creality 3D Ender-3, Ender-3 Pro or Ender-5 then this is an awesome option. This motherboard has a TMC2225 driver and is circuit-optimized which makes it perfect for the Ender-3 and comes pre-installed with silent firmware. This motherboard is also best for your Creality 3D printer.
This is a good motherboard. I like the thermal runaway protection, and it can support more than one extruder head. What makes this motherboard unique is the fact that it comes with pre-installed firmware for Ender 3 Pro, so you don’t have to worry about any configuration. The Cregrant New Upgrade Motherboard comes with pre-installed firmware for Ender 3 Pro, so you won’t have to worry about any configuration!
Since it is pre-configured and has a bootloader, you don’t have to worry about uploading firmware every time you want to switch filaments (like if you’re using PLA and then switch to ABS). Other motherboards only allow a single extruder head unless you upload new firmware, and can take upwards of 10 minutes to load up! The Cregrant New Upgrade Motherboard is also compatible with other printers like Ender 3/Ender 3 v2/Ender-5.
If you have an Ender 3 Pro, I highly recommend picking this motherboard up. It’s a plug-and-play motherboard, you don’t have to worry about uploading any firmware or configuring anything!
I like the thermal runaway protection on this board since it helps prevent crashes and burnt-out parts. I would definitely recommend using this board for an Ender 3 Pro printer.
This is a pre-installed motherboard that comes with a bootloader. This means you can switch filaments without uploading firmware each time. It has support for multiple extruder heads and comes with thermal runaway protection to help prevent crashes.
This motherboard is a good buy if you have an Ender 3 Pro like I do, as it comes pre-installed with the Ender 3 Pro’s firmware!
Pros:
- Pre-installed firmware for Ender 3 Pro
- Thermal runaway protection
- Supports multiple extruder heads
Cons:
- None!
Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard
- New Version: This is the newest Silent Controller board for Creality 3D printers
- Driver:TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable.
- Thermal runaway protection is enabled.The Board is Optimized by Circuit ,effectively solve the Heating Problem.
- Easy to Operate:With USB Port,can be Worked with E/Z/Y/X Axis Motor Fimware 1.1.8 comes pre-installed on this board.Suitable for Ender-3 /Ender3 Pro.
The Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard for the Ender3 is a great addition to the Ender3. I have used it now for about a month and really like how easy it has made printing. Instructions are not clear on how to do the installation, but with some tinkering and extra work, I finally got it working and it is a great upgrade. I would not attempt to install it without the aid of a computer expert, and at this time don’t think I am able to answer any questions as there are no clear instructions. The only issue is getting the old board out, taking off the old mount for the new one, and then mounting it on the printer so that it will work properly.
One of the best parts about this board is it has a USB port that allows you to connect it to a computer. This means you can modify the firmware on your board with firmware 1.1.8. Creality 3D has done everything they can to make sure you are satisfied with this product, and they have succeeded.
It can automatically detect thermal runaways. This means it will shut down your printer if something goes wrong, making your life much safer.
This board has driver TMC2225 installed and works perfectly with Ramps 1.4+, Mini-Rambo, Makerbot Motherboard Ultimaker 2 3D Printer Board.
The new motherboard works great and has simplified the process of printing. I believe that for a computer expert it would be fairly easy. If I had a printer expert here, it would be simple.
Pros:
- New Version
- Driver TMC2225 installed and works perfectly with Ramps 1.4+, Mini-Rambo, Makerbot Motherboard, Ultimaker 2 3D Printer Board.
- Easy to Operate
Cons:
- Not for the Ender 3 users without some good computer knowledge.
CCTREE Creality Ender 3 New Upgrade Motherboard
- Silent function( Customized and Non-standard matching) Creality3d upgraded V4.2.7(4.2.2) silent board has been updated from 8 bit to 32 bit.
- Driver: TMC2225 driver. Marlin 2.0.1 and bootloader installed. You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
- Eeay to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor.
CCTREE Creality Ender 3 New Upgrade Motherboard is a great option for those people who want to upgrade their electronics. The product is very well made and it is durable, too. You don’t need any extra tools to install the new motherboard; you just need to unplug the power cord and remove 4 screws from the top of the case. It also comes with a silent function and driver TMC2225. The board can be upgraded from 8 bit to 32 bit. Restarting your machine can take 10 seconds. Thermal runaway protection is enabled by this board which effectively solves the heating problem when printing.
This motherboard upgrade is a perfect choice for those who want to have the option of using their Creality Ender 3 with a spindle or other type of non-standard matching setup. This motherboard offers easier access to the 8th pin and can be used in any Creality Ender 3 printer. Integration is easy as it does not require code changes and has drop-in compatibility. The upgrade includes TMC2225 drivers, Marlin 2.0.1, and bootloader installed so you can start printing right away after installation without any additional setup work required by you.
All files are optimized so there’s no need to do tuning like previous boards, which can decrease time spent waiting on your printer! It’s a great solution for those who want to use their Creality Ender 3 for other tasks and reduces the need to upgrade your entire printer.
Pros:
- Silent function: Customized and Non-standard matching
- Driver: TMC2225 driver. Marlin 2.0.1 and bootloader installed
- Restarting can take 10 seconds
Cons:
- None
Bigtreetech Skr E3 Rrf Idex V1.0 Upgrade Ender 3 Motherboard
- 🔻The SKR E3 RRF INEX V1.0 expansion board is matched with the SKR E3 RRF V1.1 motherboard and dual z-axis upgrade kit to Let the Ender3 series printers realize independent dual-nozzle printing.
- 🔻Add protection circuit: The onboard power supply anti-reverse design and plug-in fuse effectively protect the motherboard from being burned out; the thermistor interface is equipped with a protection circuit, even if there is a 24V leakage phenomenon, the chip pins will not be burned;.
- 🔻Onboard Sensorless homing function, plug in the jumper to use this function. Compatible with Marlin and RepRapFirmware firmware.
- 🔻Reserve material break detection and an unused expansion interface; Reserve PT100 interface.
- 🔻If you don’t understand anything, you can contact our technical support after-sales service at any time, and we will provide you with help in time. thank you for your support.
Bigtreetech Skr E3 Rrf Idex V1.0 Upgrade Ender 3 Motherboard is a quality product that does not only has a good price but also has the best features that will fit your needs and increase your printing experience. It has an anti-reverse design that will protect the motherboard from being burned, it’s got a sensorless homing function for perfect prints and an unused expansion interface for more upgrades in your Ender3 Series printer.
Bigtreetech Skr E3 Rrf Idex V1.0 Upgrade Ender 3 Motherboard is a great choice for the Ender 3 printer. The motherboard and two z-axis upgrades are matched well to help upgrade Ender 3 printers to dual-nozzle printing. They also come with a protection circuit to protect the motherboard from being damaged by power voltage leakage. With onboard sensorless homing function, it can be compatible with both Marlin and RepRap firmware after plugging in a jumper.
Other features include reserve material break detection and an unused expansion interface, plus a PT100 interface for temperature calibration.
The motherboard is 100% compatible with the original Ender 3 and easy to install without any other accessories. The onboard has several protection functions, including power input protection, reverse power protection, current protection, and over-temperature protection.
Pros:
- Onboard sensorless homing function, plug in a jumper to use this function. Compatible with Marlin and RepRap firmware.
- Reserve material break detection and an unused expansion interface; reserve PT100 interface for temperature calibration
- The motherboard is 100% compatible with the original Ender 3 with no accessories necessary
Cons:
- A slight downside may be that it lacks dual z-axis upgrade kits and you can purchase them separately which will cost more money
Ender 3 Motherboard Upgrade Benefits
An upgrade to the motherboard of the Ender 3 motherboard upgrade 3D printer is a great way to get more out of the machine if you are looking for more features. A lot of people don’t even know that they can upgrade their Ender 3 motherboard but it’s a pretty simple task. You’ll find that there are plenty of different boards available and most of them offer some type of new functionality. One example is an LCD screen which will help you keep track of your printing process.
The motherboard upgrade will replace the motherboard on your 3D printer which can be useful for a number of reasons. For one, it may have crashed or stopped working for some other reason. Second, you might want to upgrade the firmware so that your Ender 3 can do more than it’s originally programmed to do.
There are thousands of motherboards on the market so there is no single best motherboard but in my opinion, the Ender 3 Motherboard is a good choice because it has most of the features that I would want in a motherboard such as dual extruder support, LCD panel, and SD card reader.
• The ender 3 motherboard upgrade can improve the features of your Ender 3 printer
• There are a variety of different boards for you to choose from
• A lot of people don’t know they can get an Ender 3 Motherboard Upgrade but it’s easy, doesn’t cost much, and may give new life to a machine that is slowing down
• If you’ve had problems with your Ender 3 motherboard you might want to consider upgrading
Factors To Consider When Choosing Ender 3 Motherboard Upgrade
It has been a while since Ender 3 was released. The motherboard of the printer is not compatible with new software updates and this makes it difficult to use. In order to reduce these issues, some people are looking for an Ender 3 Motherboard Upgrade.
There are many factors to consider when choosing a motherboard for the Ender 3. Choosing the wrong one could lead to problems such as not being able to print or low-quality prints that have gaps and seams. This article will go over some of these considerations in order to help you make an informed decision on what board is best for your needs.
What’s Your Budget?
The price range of compatible boards ranges from about $30-$120 depending on where you buy them and what features you want. If money isn’t an issue then getting the better end of this spectrum would be helpful in that it’ll last longer, but if the budget is tight then look at cheaper models which can still get the job done just fine.
What Are Your Needs?
If you’re a casual user then something cheap like the RAMPS or MKS boards would be sufficient to perform basic functions. On the other hand, if you’re going to be doing more than just a handful of prints and want better performance than an EINSY board is probably the way to go.
How Many Extruders Do You Have?
If you’re only using a single extruder then the standard RAMPS or MKS boards will be fine, but if you plan on adding more than things are a little more complicated. Not all compatible boards can handle multiple extruders so make sure you double-check before buying.
What Features Do You Need?
If you want the ability to upgrade your printer in the future then getting a board that has expansion ports is recommended, but keep in mind this could lead to compatibility issues with other hardware. This shouldn’t really be an issue unless you buy something like RUMBA which doesn’t actually have its own firmware.
What Firmware Does It Support?
The motherboard is essentially the brain of the printer and communicates with every component so having a board that supports your choice of firmware is recommended, but since Marlin and Repetier are by far the most popular this shouldn’t be a problem unless you’re using something obscure like Redeem.
Does It Come With A Connector?
If you don’t already have an endstop/display/extruder then make sure it does or else you’ll need to buy the parts separately. Some boards like RAMPS and RUMBA even come with their own microcontroller so that’s something worth looking at.
What Thickness Of Pcb Is It?
The thinner the better as this will allow you to fit more of them in your printer which means more connectivity. After all, one of the key advantages of these boards is that they can support up to 6 stepper motors and 4 heaters so having a 1mm or 2mm board would be great.
What Are The Dimensions?
If you’re running out of space then getting a thinner board could help, but it is also important to check the length and width as anything too big can cause problems with other components such as your X-axis stepper motor. Make sure there’s nothing blocking either side of it and that the connectors are in a place you can reach.
How Many Amps Of Power Does It Have?
This is another essential thing to look at when considering whether or not your board will handle your current needs. Anything over 4 amps could lead to problems so keeps this in mind as too much strain on the motherboard could lead to overheating, or in some extreme cases even fire.
Is It Open Source?
Open source boards are generally more reliable since they have a larger community and a longer lifespan compared to closed source ones, but this is not always the case so don’t let this be your deciding factor. The main reason people choose open source is because of better support and software, but if you’re using proprietary firmware then this is less of a concern.
Does It Have Active Support?
Without good support, it’s going to be difficult to get help in the event that something goes wrong, or if you want to try upgrading your printer. In most cases, people tend not to share information about the proprietary boards because it could lead to legal issues, so if you’re looking for good support then getting an open-source board gives the best chance.
Which Is Most Reputable?
Reputation doesn’t hold as much weight as quality and features do when determining which motherboard to buy, but it is still something that should be considered as there are some very shady companies out there who just want to steal your money.
FAQs About Ender 3 Motherboard Upgrade
Does the motherboard work with all Ender 3 models?
Yes, all Ender 3 models are designed with the mechanism of software that helps them can work very well with every new motherboard. So you can use them with all your motherboard devices.
Can I use this motherboard if my Ender 3 doesn’t boot up?
No, the technician gives some advice that you will need to fix your printer before applying for the upgrade. Since if not, it will influence your device a lot after that.
How do I install this motherboard into my Ender 3?
Since the installation may be a bit difficult with the beginner and this is a very detailed process, so contact your local support if you need help. It will be better for your devices.
Will I have to update the firmware on my Ender 3 printer before starting the upgrade?
Of course. We think you should check with your support or the manufacturer’s website if you’re unsure about updating or anything related.
How long does the whole process take?
This can vary depending on how familiar you are with doing upgrades, but it shouldn’t take longer than a few hours. Then you don’t have to worry that it will take you too long to update.
Conclusion
There are a lot of Ender 3 motherboard upgrades out there and it can be tough to decide which one is best. This is why we’ve compiled this list for you! We know that your decision process may not always be easy, so if at any point in the future you need help deciding on what motherboard upgrade will work best with your needs, remember: Your #1 partner for all things tech-related is here to help. Give us a call today or use our contact form online anytime!
Read Also:
Top Best Counting Macros Book: So Easy And So Good
What’s Your Favorite Part Of Summer? – Dunkin Donuts Pool Float Review
