Top 20 Best Fuel Hose Reviews & Comparison

If you’re in the market for fuel hose, you won’t want to miss our Best fuel hose list in 2023. Our carefully curated selection is based on 98262 customer reviews gathered from all around the world – giving it a truly global perspective!

See what others are raving about now and make sure that your next purchase will be one of lasting value.

Bestseller No. 1
Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet
  • Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT.
  • Material: This small engine fuel line is made of high-quality NBR, which is oil resistant.
  • Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F.
  • Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase.
  • How To Use: Use hose barbs and fuel line clamps to install.
SaleBestseller No. 2
Fuel Transfer Hose, Fuel Hose 3/4" x 20' (6 m) , 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose
  • 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose Designed for use with all electric fuel transfer pumps, Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils.
  • 3/4 Fuel Transfer Hose 20 feet, ID: 3/4 inch / 19mm; OD: 1.2 inch / 29.5mm; Total Length: 20 feet.
  • This fuel transfer hose 3/4 inch can work in the range of -30°C+120 °C. Fuel transfer pump hose 3/4 inch,1520 PSI high pressure.
  • 3/4 Fuel Transfer Hose, NBR liner hose, Steel wire hose has good oil resistance, Cold-resistant, aging resistance, tight tube body, resistance to flexion, superior pulse performance.
  • 360 Days warranty. This Farm Tank Fuel Transfer Hose may also know as Fuel pump hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Diesel fuel line hose,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose.
Bestseller No. 3
Fill Rite FRH10020 1 Inch x 20 Foot Neoprene Gasoline, Diesel, Biodiesel Fuel Pump Transfer Hose with Ground Wire and 1 Inch Male Fittings, Black
  • EFFICIENT FUEL TRANSFER: Provide fast and consistent transfer of fuel from your pump to your vehicle; Dimensions (diameter x L): 1 x 240 inches
  • DURABLE MATERIALS: Long-lasting design crafted from fuel-resistant neoprene exterior with a durable nitrile inner tube
  • NO KINKING: Kink-resistant internal spring guard prevents the hose from tangling and cutting off the supply
  • SPARK-FREE: Built-in stainless steel ground wire prevents sparks and other safety hazards
  • WORKS WITH MOST FUEL TYPES: Compatible with gasoline, diesel, biodiesel up to B20, ethanol up to E15, kerosene, and mineral spirits
Bestseller No. 4
EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 10FT 300PSI
  • ID: 3/8inch (10mm),;OD: 2/3inch(17mm).Material: NBR.
  • Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).
  • Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.
  • Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase.
  • EVIL ENERGY provide 10ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message.
Bestseller No. 5
10 Feet NBR Fuel Line Hose Black Nylon Steel Oil Gas Fuel Line Hose 3/8 Inch Inside Diameter Suitable for Fuel Systems Engines Tube Hose
  • 【Size】 ID: 3/8" (10mm), OD: 2/3 " (17mm), Length: 10FT.
  • 【Premium Material】 Premium nylon fiber wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.
  • 【Strong and Durable】 Nylon Braided Fuel Hose Working Temperature Range: -40°F to +300°F, Maximum Working pressure: 290 PSI, Burst pressure: 1160 PSI. PROFESSIONAL OIL RESISTANT DN8MM 20BAR MAXIMUM W.P.
  • 【Applicable】 Fuel line can work with diesel/ biodiesel/ gasoline/ Oil/ grease/ water and air, etc.
  • 【Wide Applications】 Rubber fuel line widely used in the fuel system, oil cooling, steam emission, PCV system, please check the pressure of application before purchase.
Bestseller No. 6
5 Size Fuel Line Hose - 3/8" 1/2" 5/16" 1/4" 3/16" ID NBR Rubber Gasoline Tube with 20pcs Clamps for Small Engines, Suitable for Kawasaki EZGO Golf Cart Snowmobile Motorcycle ATV Tractor
  • 【5 Sizes Set】you will receive 5 different specifications lengths 3.3ft NBR fuel line hose (inner diameter are 3/8in,1/2in,5/16in,1/4in,3/16in) and 20 hose clamps. The 5 different inner diameters of our products can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools.
  • 【Thicker Fuel Hose】Our oil hose is made of NBR rubber with a braided layer of polyester thread in the middle. The wall of our fuel hose is thick enough to have the advantages of not easy to wear, not easy to aging, high temperature resistance, low temperature resistance, good acid and alkali resistance. The bending performance of the fuel hose is very good. Working Pressure: 300 psi. Burst Pressure: 1160 psi. Temperature range: -20°F to 221°F(-30°C to 105°C).
  • 【Oil Tube Size】Our 5 different sizes of flexible NBR rubber tubes are: ID: 3/16in OD: 0.43in (11mm); ID: 1/4in OD: 0.47in (12mm); ID: 5/16in OD: 0.55in (14mm) ; ID: 3/8in OD: 0.64in (16.5mm); ID: 1/2in OD: 0.74in (19mm). This cost-effective product set can meet your different needs at once.
  • 【Long Service Life】Our fuel hose is not only well made, but also has a smooth and flat surface that can withstand large pressure, which is perfect for connecting and replacing the rubber fuel lines of various ATVs, motorcycles, snow blowers, lawnmowers, tractors, scooters, golf carts, motorcycles, pond pumps and other small engines. The hose clamps included in the product can help you secure the oil line well and make it serve you for a long time.
  • 【Widely Used】Our fuel lines can be widely used in oil tanks, oil pumps, engines, and other parts that come in contact with oil. It is suitable for fuel systems, oil cooling, vapor discharge, etc. It can convey gasoline, diesel, biodiesel, motor oil, lubricant, water, and even air. Tips: We do not recommend that you use this small engine fuel line to transport transmission coolant and methanol, or to fuel injected. It is also not recommended for use with submersible power steering pumps.
Bestseller No. 7
HBD Thermoid NBR/PVC SAE30R6 Fuel Line Hose, 3/8" x 25' Length, 0.375" ID, Black
  • Size SAE30R6 KX Date; Made in USA
  • Reinforced with two spiral polyester
  • Color Black
SaleBestseller No. 8
IZOKEE 1/4" Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
  • 【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!
  • 【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.
  • 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.
  • 【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage.
  • 【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect.
Bestseller No. 9
Apache 98108450 3/4" x 10' Farm Fuel Transfer Hose Male x Male Assembly with Static Wire
  • Country Of Origin: China
  • Model Number: 98108450
  • Item Package Dimension: 10.399999989392" L x 8.799999991024" W x 2.199999997756" H
  • Item Package Weight: 3.5 lb
SaleBestseller No. 10
SUPERFASTRACING 3/4'' x 20' Fuel Transfer Hose Fluid Oil Pump/Tank Tube Hose Black
  • Package Including: 20Feet 3/4'' Pump Hose
  • Hose with all electric pumps Static Wire
  • Inlet 3/4 In. NPT , Outlet 3/4 In. NPT, Length 20 ft , Diameter 3/4 In.
  • Application For Refined Petroleum Liquids
  • For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils
Bestseller No. 11
Fill-Rite FRH07512 3/4 Inch by 12 Foot Neoprene Fuel Transfer Hose with Male Ends for Gasoline, Diesel, B20 Biodiesel, E15 Ethanol, and Kerosene
  • WORKS WITH ELECTRIC PUMPS: The Fill-Rite 3/4 Inch Fuel Transfer hose is designed to be used with any electric fuel transfer pump for quick, safe, and easy transference of gases and fuels
  • FUEL COMPATIBILITY: Compatible with lots of gases and fuels, such as gasoline, diesel, biodiesel up to B20, ethanol up to E15, kerosene, and mineral spirits
  • DURABLE AND SAFE: Constructed of a fuel-resistant neoprene exterior and durable nitrile inner tube, and complete with a kink-resistant internal spring guard and stainless steel ground wire, the fuel transfer hose is durable and safe to use
  • COMPACT DESIGN: Featuring 3/4-inch male NPT fittings for simple fit and fixture, with a 0.75 diameter and 12 feet of length, and a weight of 4.32 pounds, this hose doesn’t take up lots of space and is easy to manipulate
  • MADE IN THE USA: Made in the USA and backed by a 1-year limited manufacturer's warranty
Bestseller No. 12
10 Feet Fuel Line Hose, 3/8 Inch Inside Diameter NBR Fuel Line Hose, Black Fuel Systems Engines Hose Braided Rubber Fuel Line Hose
  • 【Fuel Hose Specifications】The size of the product is as followings: ID: 3/8 inch. Length: 10 feet. Please measure the size before purchasing!
  • 【Working Pressure】 The fuel line hose can withstand pressure 290 PSI, burst pressure 1160 PSI, temperature Range -40°F to 300°F.
  • 【Applicable Medium】 Professional Oil Resistant DN10mm 20BAR Maximum W.P. 3/8 inch ID fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, etc.
  • 【Application】 Rubber fuel line widely used in fuel system, oil cooling, PCV system, steam emission. Please check the pressure of the application before purchasing.
  • 【Notes】The 3/8 inch fuel hose is made of premium quality NBR rubber, nylon braided fuel line relatively hard, it can't be bend and fold in half. Professional installation is highly recommended!
Bestseller No. 13
5/16" ID Fuel Line Hose SAE 30R7, 150 psi 25' Length Fuel Hose
  • 【5/16" Fuel Line Hose Widely Used】 Multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.
  • 【High Quality Material】 Fuel Hose Made of NBR rubber, resistant to diesel, gasoline, lubricating oil, hydraulic oil, coolant, etc, Also available in unleaded gasoline, diesel, ethanol (E-10), E-85 and sour gas blends.
  • 【Fuel Hose Size】 Inner Diameter (ID): 5/16" (0.3125"), Outer Diameter (OD): 0.55"(14mm), Length: 25FT.
  • 【Working Pressure and Temperature Range】 150 psi Burst Pressure: 500 psi, -40°F to 257°F (-40°C to 125°C).
  • 【After-Sales Service】 Buy with confidence. We offer free returns and exchanges, if you have any questions, please feel free to contact us by email.
Bestseller No. 14
ACDelco Professional 32103 25 ft Bulk Reel of 5/16 in Fuel Line/PCV/EEC Hose
  • Nitrile tube that is spiral reinforced for enhanced durability
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments
  • Vacuum rating of 24 in/Hg for sizes less than 12 in I.D., and 10 in/Hg for sizes 12 in to 34 in I.D. at ambient temperatures
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume
Bestseller No. 15
GROZ Gravity Feed Fuel Dispensing Kit | ¾-Inch NPT x 10-Foot Anti-Static Rubber Fuel Hose | Manual Fuel Nozzle with Swivel | for Fuel Transfer Pumps (44094)
  • COST EFFECTIVE: Kit includes 10-feet anti-static hose and manual fuel control nozzle with swivel
  • AVOID SHOCKS: Hose has a static wire that dissipates electricity associated with electric pumps.
  • LONG LASTING: Metal nozzle body; aluminum guard, discharge spout, and trigger; nitril rubber hose
  • EFFICIENT: With continuous flow switch which can be controlled manually for unattended dispensing
  • MULTI PURPOSE: Great for commercial and industrial use, ideal for diesel, gasoline, and kerosene
Bestseller No. 16
3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black
  • Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.
  • Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.
  • Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.
  • Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak.
Bestseller No. 17
(3/4" NPT, 2PCS) Fuel Hose Swivel 360 Rotating Connector for Fuel Transfer Pump Fuel Nozzle Multi Plane Fuel Plane Swivel
  • 【High quality material】:The Fuel Hose Swivel is made of strong and high-temperature resistant zinc alloy. Upgraded materials to address leakage issues. Rust and corrosion-resistant works well even in low-temperature environments. Save the life of your nozzle and hose.
  • 【360°】The fuel swivel has a 360-degree rotation function to prevent the hose from twisting during refueling, ensuring that the fuel nozzle does not move and is less likely to leak. With this swivel, you can turn the nozzle in the direction you need at any time without having to twist (or untwist) the hose.
  • 【Versatility】With our fuel Hose swivel fittings, you can easily swivel the hose. No more twisting and kinking of your fuel hose. Makes fuel delivery much easier! Suitable for fuel nozzles, filling nozzles, fuel nozzles, automatic fuel nozzles, gas pump nozzles, fuel nozzle swivels, etc.
  • 【NPT】 The fuel swivel is NPT (American Standard) and is so easy to install that you can install it to meet 3/4 inch male and female products. Anywhere you need to dial in a hose or make sure you don't get the hose in a bind, you just add one of these swivels and you won't have to fight with the hose anymore.
  • 【Best Service】 KALAGEEN is committed to improving the shopping experience of our customers, what you buy is not just a product, but a whole set of our after-sales service. If you buy a product and then there is a leakage problem, a missing parcel product problem, a return problem, or just one email, I will deal with it for you the first time, so that you can easily enjoy a wonderful shopping experience. We always solve it for you within 24 hours.
SaleBestseller No. 18
Continental 65127 5/16" ID Fuel Hose - 50 psi - SAE 30R7 - 25' Length
  • 25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line
  • Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas
  • Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"
  • Working Pressure: 50 psi | Burst Pressure: 250 psi
  • Temperature Range: -40°F to 257°F (-40°C to 125°C)
Bestseller No. 19
ACDelco Professional 32104 25 ft Bulk Reel of 3/8 in Fuel Line/PCV/EEC Hose, Black
  • Nitrile tube that is spiral reinforced for enhanced durability
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments
  • Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume
Bestseller No. 20

Our selection of top-rated fuel hose provides something for everyone, no matter your budget. We’re sure you’ll find the perfect item to fit all your needs!

Leave a Comment