If you’re in the market for puller tool, you won’t want to miss our Best puller tool list in 2023. Our carefully curated selection is based on 90422 customer reviews gathered from all around the world – giving it a truly global perspective!
See what others are raving about now and make sure that your next purchase will be one of lasting value.
- This Puller designed for professionally dual-purpose use
- Easy and safely to remove the stuck on the rear wiper arm
- Use to remove battery terminal clamp without damage to cause battery post
- Jaw opening: 1/16" - 1-1/16" (6-28mm); Outer diameter:1-7/8" (48mm)
- Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline
- GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance
- COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs; the 4-slot yoke also allows you to use it for two or three-slot operation with ease
- DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened AISI 1045 medium carbon steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right; all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service
- SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing
- WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market
- REVERSIBLE JAWS: 8 adjustable positions that allow for inside and outside grip.
- HEAT TREATED CHROME VANADIUM STEEL- Added strength that lasts longer than standard hardened steel gear pullers.
- CHROME FINISH: Easy to clean and reduces oil and grease build up.
- DAMAGE FREE REMOVAL- Removes slide gears, pulleys, and flywheels off of a shaft without damaging your application.
- JAW SPREAD: 6. 5"
- Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
- Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread; a 4 inch gear puller with a 5" max. reach and 4" max. spread; a 6 inch gear puller with a 7.3" max. reach and 6" max. spread; and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread.
- Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside; the 8 in. puller can be used in 4 different positions to deal with both medium and large parts.
- AISI 1045 Medium Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
- Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service.
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.
- Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 159mm,Screw Diameter (top): 14mm,Screw Diameter (bottom): 13mm,Claw Length:5.6inches/140mm,Claw Thickness: 3-5mm, For more size description please see size picture and video.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. Perfectly suitable for car flywheels, motorcycle wheels, car wheels, scooter motorcycle bearings and gears, etc.
- High quality after-sales service - Customers’ feedback always matters. The goal of our Mannifen brand is to make you satisfied with buying. If you’re not 100% content with our 6 inch two claws gear puller, please feel free to contact us. We'll try our best to provide you with a satisfactory solution.
- ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
- HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
- PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
- ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
- Repair tool can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline; Great multi-function small repair tool designed for professional use
- Battery terminal puller overall forged by carbon steel is durable and exquisite appearance. It can easily remove stuck battery terminal,also remove bolt on windshield wiper arms that fit over a tapered spline
- Sturdy, Durable & Long Time Service -- This Battery Bearing Extractor Puller is made of strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time
- Easy to Operate & Quality Assurance: Jaw opening 6-28 mm for wiper arms with an o/d up to 42 mm; With our battery bearing puller you can get a great helper to handle with difficult tasks
- [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts
- [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles
- [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length; Bolts come in a mixture of 16, 18, 24, and 28 thread pitch
- [Built to Last] Heat-treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization
- [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience
- [Great Compatibility]: 3-Jaw hydraulic gear puller set features 5 tons max capacity, 2” (50mm) axis travel, 7 7/8” (200mm) max spread and 5 1/2” (140mm) max reach for fully meeting your different requirements on pulling truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly
- [3 In 1 Design]: Puller set integrates pump, oil tube and drawing machine for providing comprehensive functions on mechanical installation and repair, can be used horizontally and vertically, not restricted by work site environment
- [Flexible & Easy Operation]: 3 jaws can be adjusted from high to low point and pump head can be rotated 360 degrees for flexibility; 2-way yoke allows 2 or 3 leg pullers for easy interchanging; rotate the oil return switch and pull up the handle to pressurize or release pressure; safety flooding valve to avoid overloading
- [Durable Steel Construction]: Hydraulic pump is made of high strength 45# carbon steel and processed by integrated welding for preventing oil leakage and providing sturdiness, rust resistance and corrosion resistance for frequent use; durable alloy steel jaws for ensuring stability
- [Portable & Wide Application]: Pump and all accessories can be packed in a mould carrying case well, easy for you to transport or storage; widely used for railway vehicle maintenance, car mechanical factories, mining equipment maintenance, repair workshops。
- WIDELY USE: This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.
- HIGH QUALITY: The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.
- ADJUSTABLE: 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-90mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.
- GET INTO TIGHT AREAS: This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.
- QUALITY ASSURANCE: 100% satisfactory service. We value your shopping experience and strive to offer a high-quality product and service. If you're not completely satisfied, you can ask for a replacement or full refund.
- PULL FRONT WHEEL HUBS: This wheel hub puller set by Orion Motor Tech includes a universal 3-3/4'' to 4-1/2'' hub puller, a 5/8"-18 forcing bolt, a fasten lug nut, and a helpful socket to quickly and easily loosen and remove your front wheel hubs
- UNIVERSAL COMPATIBILITY: The front hub puller, compatible with most vehicles with independent front wheel suspension, firmly locks onto your axle assembly, making removal of stuck front hubs a cinch; the threading of our 5 pound forcing bolt works with other 5/8"-18 adapters to deal with various car models or to handle other work around your engine
- QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your front hub pops out smoothly, leaving the wheel bearing inside the joint and the rest of your vehicle untouched
- BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our wheel hub removal set provides strong and dependable service for the long haul; heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long-term use
- 1 YEAR WARRANTY: Order Orion Motor Tech's front hub puller set with your peace of mind assured thanks to its strong 1 year warranty and our usual friendly 24/7 customer service, ready to enjoy fast, simple, and damage-free auto servicing
- Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free
- Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Made of chrome vanadium steel for strength and longevity, it is durable.
- The tip of the ejector pin is a heat-treated rotating head without damage that is durable and labor-saving.
- Adjustable clamping depth. The reasonable design of the claws makes them not fall off when the force is applied.
- STRONG SUCTION FORCE - This dent puller kit's maximum horizontal suction is 130 lbs, and the maximum vertical suction is 80 lbs.
- PREMIUM MATERIAL - The handle of the suction cup dent puller is made of solid ABS which has extremely hardness, is welded to the sucker so firmly that the handle will not break easily, is solid and durable, has a long service time. The soft rubber pad is gentle on dent surfaces and won’t scratch the paint.
- EASY TO USE - Clean and heat the dent with hot water, start operation from the shallow concave line then press hard and make sure the suction cup fits seamlessly, gently pull the suction cup up by using the handle, the dent surface will be pulled up with the dent puller.
- WIDE APPLICATION - The suction cup is a great car dent removal tool. In addition, this suction cup dent puller is good at moving furniture, glass, tile, etc. And it can be used as the door/window handle, cell phone holder, and so on.
- NOTE - As car dent puller: 1. The sucked area of the sucker should be relatively flat to ensure that the sucked area of the sucker can discharge air smoothly and form a vacuum. 2. It is forbidden to use this product when the car paint is cracked or damaged in the recessed area. 3. When the recessed area of the vehicle is extremely irregular (the suction cup cannot effectively discharge air), the method of multi-point adsorption and simultaneous pulling can be used.
- DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" 3 jaw gear puller gear removal tool for slide gears, pulley, and flywheel makes removal simple and damage-free.
- BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
- VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
- 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
- PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
- Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization
- Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
- Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length; Bolts come in a mixture of 16, 18, 24, and 28 thread pitch
- Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration.
- The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience
- The Tiger Tool 10105 provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all cars, light-duty trucks and farm machinery.
- Application: Commonly found on class 1-2 trucks, cars and equipment. (For use with Ford F-150/350, for use with Chevrolet 1500/3500, for use with Ram 1500/3500, etc.). The 10105 works with U-joints that have bearing cups between 1” to 1.25” O.D. Please note: Damage to flange style yokes may occur if bearing cups are severely seized. The 10105 is not compatible with Double Cardan joints. To service Double Cardan joints see Tiger Tool 10205.
- The Tiger Tool 10105 is Manufactured from high-grade materials for strength and durability. This tool eliminates dangerous vice-and-socket or hammering methods and reduces risk of damage to the driveshaft, yokes, joints or bearing caps.
- Our proprietary manufacturing and metal treatment processes ensure that the threads will hold up under even the most extreme conditions which are commonly found in seized u-joints. We take our U-Joint Pullers seriously, each glove is cast from high-grade steel to ensure the most universal fit possible while still maintaining the strength to tackle even the most stubborn u-joints.
- The Tiger Tool Automotive UJoint Removal Tool, part number 10105, is proudly made in North America to ensure you have what it takes to get the job done right.
- VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs
- WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- Suitable for removal of harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys.
- Package Includes: Pressure screw, 4 slotted yoke & the following pulling screws: 2pcs- 3/8""X4"", 2pcs- M8-1.25X80MM, 3pcs- 3/8""X2"", 3pcs- 5/16""X2"" all in a convenient molded plastic carrying case.
- Allows for even pressure which prevents damage to parts, Yoke allows for either 2 or 3-hole application.
- Hardened and tempered, precision-machined bolts
- For Pulling Balancers, Vibration Dampers, Pulleys, and Gears with Threaded Holes
- Since our 1919 beginning, KD Tools has been driven by innovation.
- From our first specialty tool, the Model-T valve spring lifter, to our latest Ratcheting Puller, we've built our reputation with tools that make tough jobs easy.
- That's why we are the first choice for thousands of automotive technicians worldwide.
- Auto Body Paintless Dent Repair Tool is a tool designed to repair the dents caused by collisions on the metal surface, and is designed with physical science principles to save labor, save time and money, and not damage the original paint.
- The Dent Pullers are made of high hardness metal and the bottom of the dent puller contact with high-quality rubber precision, can avoid damage to the original paint during the repair process.
- Dent Removal Kit needs to work with high viscosity glue, hot melt glue is the best choice, we suggest using hot melt glue to work with this dent repair tool. Suitable for big dents, repair door dents and impact damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
- This Dent Puller Kit comes with detailed repair steps introduction to operate, it makes the dent removal process more easily. Instead of spending hundreds of money in 4s shops, our dent puller can help you repair dents by yourself in many times, Patience and try again a few times will see the effect.
- Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.)
Our selection of top-rated puller tool provides something for everyone, no matter your budget. We’re sure you’ll find the perfect item to fit all your needs!