Table of Contents
Why you should trust us
- 8 products tested
- 5 days researched
- 4 experts involved
Buyer’s Guide
There are a variety of hybrid table saw models, depending on the level of functionality and features desired. Reviews vary.
Primary Benefits & Drawbacks of a Hybrid Table Saw
Overall, hybrid table saws combine the best of cabinet and portable contractor’s saws. They produce quality results more cost effectively, and the operator has the durability of a solid workshop cabinet saw and the mobility of a contractor’s table saw.
It is light and stable due to the cabinet base that houses the motor. Belt-driven sliding tables enhance the ease of cross-cutting that contractor’s table saws do not offer.
Most hybrid models have safety guards that are deliberately difficult to remove and replace, so it is advisable to leave them on for your safety. Some models have quick-release systems that eliminate the aggravation.
Riveting knives mount behind the blades and prevent kickback as well as maintain the kerf openings. They do not protect the operator from the blade and possible kickback, however.
Enclosed dust collectors (in the units’ bases) helps prevent most of the dust from polluting your shop or the surrounding environment. A blade shroud or hopper-shaped bottom successfully retains the wood dust and keeps it from building up within the corners of the cabinet.
Aligning the blade to the tabletop can be a challenge. Only a few hybrid table saws on the market have cabinet-style mounted trunnions that simplify miter slot and blade alignment. Most hybrid table saws have trunnions directly mounted under the tabletop (similar to contractor’s-style table saws) that must be adjusted. Bolts inside the cabinet must be loosened while the trunnion is adjusted.
Searching for the quality blades for your table saw? Check our reviews about the top quality blades on the market:
- Best circular saw blades
- Best dado blades
Why should you buy a hybrid table saw?
Hybrid table saws are well-suited for professional and hobbyists’ woodshops as well as on-site contractors. They are not recommended for novices and beginners.
These models provide substantial power, performance, smoothness, and accuracy. Project size does not matter and their cost and performance are intended to successfully compete with more expensive high-end units on the market.
Hybrid table saw models may be connected to a standard 120 v. outlet. No additional power source is necessary, and you will not see any reduction in power. Most hybrid table saws are as powerful, durable, and solid as the more expensive heavy cabinet models.
However, hybrid table saws are not recommended for those that have limited space or require mobility. Some of the more heavy-duty units require certain setup and operation to avoid risking severe injuries. Proper use is integral to reducing personal operation risk, saw damage, and necessary repairs.
What to look for when buying hybrid table saws
Price as well as functionality and capability features impact which hybrid table saw is the best overall value and investment. Hybrid saws are popular because they are generally more affordable than high-end cabinet models. Price may be determined by a cost to value comparison.
Ensure the hybrid table saw has safe and quality moving parts, ease of use, and portability that fits your needs. Not all features on every saw are manufactured to the same standards or to the highest degree of quality.
- Features: Closely inspect the quality of the hybrid table saw’s components. The quality of the fence system, the trunnion mass and position, the grind/finish of the top and extension wings, and features that make power transmission to the blade more efficient are desirable.For example, Powermatic contractor’s models offer an Accu-Fence system and precision-ground cast iron table tops and extension wing.Hybrid table saws typically have more substantial arbor bearings and trunnions. The blade is more precisely aligned with the miter slot and operates more easily because of the substantially larger motor and trunnions that are mounted to the base of the saw.
Hybrid table saws also have improved drive belt systems and better gearing than lighter-weight contractor’s saws. - Safety: Riveting knife and blade guard features that move with your saw are essential to reducing kickback and increasing table saw safety. Correct saw blade selection is also integral to reducing kickback risk.A dust extractor/collector also reduces the risk of dust inhalation, blade jam, or explosion. Saws that automatically brake when an electric charge (or human appendage) is detected should be a priority. Also ensure the blade has a blade guard and is sharp and clean.
Reviews
Powermatic PM1000 1791000K
No products found.
The Powermatic PM1000 1791000K cabinet saw is a heavy, sturdily-built table saw. It is the first Powermatic cabinet saw wired for 115 v. power, and has become one of the best hybrid table saws. It features a well-built cast iron, beveled-edge tilt 20” x 27” work surface that extends.
The raised blade mechanism is run by a 1-3/4 HP motor, and the hinged motor cover allows easy access to the cabinet’s interior. The tool-less guard assembly has separate side leaves to maximize safety, and the blade surround and collection hose provide unobstructed dust collection.
The PM1000’s exclusive 30-in. Accu-Fence system provides your workspace with the rigidity and stability that allows greater accuracy. The miter gauge is sturdy and pivots 60 degrees left and right. Standard kerf and low-profile riving knives are included.
This Powermatic is easy to set up and use. The workspace has a conveniently-located large-numbered bevel scale. The saw has ergonomically-designed 7-inch handwheels that make adjusting the blade height and bevel easier.
The arbor lock enables single-handed blade changes with a few/simple tools, and its poly-v belt system reduces vibration and increases efficiency.
Accessories available for the Powermatic PM1000 1791000K include a 0.79-in. low profile riving knife, tenoning jig, and mobile base extension kit.
PROS
- Hands-free power switch
- Easy setup
- Reliable
- Powerful
- Well-built, high quality
- Five-year warranty
CONS
- Heavy; not portable
- Short power cord
DEWALT DWE7491RS
No products found.
The DeWalt DWE7491RS is one of the most cost effective and best hybrid table saws designed for the worksite. It features a tough mobile stand suited to rough terrain. It has a superior 21-7/8” x 26-3/8” patented material support table that extends. The adjustable-angle 10-inch, 24-tooth carbide blade is run by a 15 amp motor, and it is wired for 120 v. power.
The saw cuts at depths of 3-1/8 inches at 90 degrees or 2-1/4 inches at 45 degrees, and it has a 32-1/2-in. rip capacity that easily cuts large hardwood as well as trim materials. Its 24-1/2-in. rip capacity ideally cuts medium and small trim materials, and narrow rip cuts are more easily completed when the fence is flipped.
The riving knife is easy to remove or replace with the dust cover and guard component adjustments may be performed quickly and without tools. Rack and pinion fence rails provide fast, smooth, and accurate fence adjustments.
The Site-Pro Guard telescoping fence system extends and retracts, and the position may be locked in, which adds stability that ensures accuracy. The system easily breaks down for moving or storage when the rails are not extended.
The rolling stand is also designed for easy set up and takedown. The large, heavy-duty wheels provide excellent stability and easily roll over rough terrain, curbs, steps, debris, etc.
A metal roll cage base supports the entire table saw. The roll cage not only provides stability, it also minimizes vibrations which enhances the overall accuracy, productivity, and the tool’s durability.
The DWE7491RS saw and rolling stand set up easily folds down for easy portability. There is convenient onboard storage that provides easy access to the fence, riving knife, blade guard assembly, miter gauge, wrenches, push stick, electrical cord wrap and push stick. The 2-in. dust collection port easily connects to a vacuum.
PROS
- Easy setup/take down, highly portable
- Stable
- Versatile
- Three-year limited manufacturer’s warranty
- One-year FREE service (tool/parts)
- 90-day money back guarantee
CONS
- Slow
- Safety features could be better
Bosch 4100-09
No products found.
The Bosch 4100-09 is a lightweight, machined-aluminum table saw. It has a powder-coat finish for durability that promises long-range performance.
This hybrid table saw features a durable Gravity-Rise mobile saw stand with 8-in. treaded pneumatic wheels that easily navigate rough terrain. It breaks down easily for storage, and the stand supports a large, sturdy 29” x 32-1/2” work surface that extends.
The adjustable-angle 10-inch, 40-tooth carbide-tipped blade runs on a 15-amp, 4 HP motor and it is wired for 120 v. power. The Bosch Soft Start mechanism has a reduced start-up torque that provides a smoother start and ramp-up speed. Constant Response Circuitry additionally provides a quiet and consistent speed under load.
This table saw cuts at depths of 3-1/8 inches at 90 degrees or 2-1/2 inches at 45 degrees and it has a 25-in. rip capacity. Its large surface provides adequate size for wide-ripping bigger stock.
The 5/8-in. arbor and compatible blades allow bevel angle cuts between minus 2 degrees and 47 degrees. It also accommodates dado cuts up to 13/16 inches. The arbor lock allows quick and easy blade changes.
The 4100-09 Smart Guard System is the first modular table saw blade guard that offers a 3-position, anti-kickback, and adjustable riving to prevent material/blade pinch.
It has a clear-view guard so the blade cut is visible. The riving knife adjusts from full-upright and splitting settings to a non-thru cutting position.
This saw has no dust collection system; the SquareLock rip fence decreases waste by increasing cutting accuracy with the aid of auxiliary fence slots. A T-slot miter gauge easily slides along the rail for one-handed operation.
This table saw has built-in carry handles for easy portability and tool storage.
PROS
- Easy setup/takedown
- Carry handles, portable
- Powerful
- Heavy-duty/durable construction
- Smooth start/quiet operation
- One-year manufacturer’s warranty
- 30-day money back guarantee
CONS
- No dust blower
Shop Fox W1819
No products found.
The ShopFox W1819 table saw is a durable, powder-coated cabinet-style hybrid saw designed for professionals and built for quality and performance. It features a large, precision-ground cast iron, beveled-edge 27” x 40-1/4” work surface that extends.
It also has cabinet-mounted cast iron trunnions. The adjustable-angle 10-inch blade is run by a 13 amp, 3 HP Leeson motor with triple-belt drive, and it is wired for 220 v. power.
The saw cuts at depths of 3-1/8 inches at 90 degrees or 2-3/16 inches at 45 degrees, and it has a maximum 29-1/2-in. rip capacity. It has a 5/8-in. arbor and compatible blades allow bevel angle cuts, compound miters, or chamfers, and standard and dado table inserts are included.
The quick-release blade guard is a clear polycarbonate shield so the blade cut is visible. It has a spreader and anti-kickback pawls, and the spreader and the riving knife prevent newly cut material from pinching the blade. Anti-kickback retractable pawls slow or stop materials when they begin moving backwards.
This hybrid model has an exceptional 4-in. dust collection port that may be attached to any industrial vacuum. The easy camlock T-glide fence with HDPE face ensures accuracy. Knurled knobs make fine-tuning easier, and a magnetic switch provides thermal overload (overheating) protection.
The miter gauge has an adjustable T-slot, anodized fence and extension, with a flip stop that provides greater support for larger material. The miter fence flip stop pivots to accommodate multiple cuts of the same long and wide pieces.
PROS
- Good workshop investment
- Accurate, precise
- Portable, wheels included
- Two-year warranty
CONS
- Time-consuming setup and adjustment
- Not so easy to use; requires some expertise
- Small on/off switch
Grizzly G0690
No products found.
The Grizzly G0690 is a CSA-certified, heavy-duty, painted powder-coated cabinet-style table saw whose every facet is designed for long-lasting quality and performance. It features a large, precision-ground cast iron, beveled-edge 27” x 40” work surface with extension.
It also has heavy-duty cabinet-mounted cast iron trunnions. The adjustable-angle 10-inch, 40-tooth blade is run by a 3 HP single-phase Leeson motor with triple-belt drive, and it is wired for 220 v. power.
This Grizzly saw cuts at depths of 3-1/8 inches at 90 degrees or 2-3/16 inches at 45 degrees and it has a maximum 29-1/2-in. rip capacity. Standard and (3/16”) dado table inserts are included.
This model features a quick-release riving knife, splitter assembly, and clear blade guard and H3308 push stick. The spreader and riving knife prevent newly cut material from pinching the blade. Anti-kickback retractable pawls slow or stop materials when they start to bind.
This hybrid model has an outstanding 4-in. dust collection port that may be attached to any industrial vacuum. The easy camlock T-glide fence with HDPE face and internal nylon runners ensure accuracy.
Knurled-knob handwheels make fence adjusting easier.A magnetic switch prevents overheating, and the miter gauge has an adjustable T-slot, anodized fence and extension.
The Grizzly G0690 table saw is CSA-certified and meets CSA C22.2 #71.2-08 and UL 987 standards. The stand is included. The Grizzly G0690 and ShopFox W1819 hybrid table saws have similar features and specs, but vary in price.
PROS
- Affordable, good workshop investment
- Reliable
- Easy setup/take down
- Durable, solid
- Powerful
- CSA Certification
- One-year warranty
CONS
- Lacks mobility
- Wedge and mobile stands sold separately
LAGUNA TOOLS Fusion
No products found.
The Laguna Fusion is a light-duty, premium, well-designed table saw. The Fusion hybrid model has a thick metal compact cabinet with smart tool/accessories storage. With this product, safety is a priority.
It has built-in, retractable wheels and it features a solid cast iron 20” x 27” work surface with extension. It has newly-designed, cabinet-mounted trunnions with micro adjustable tilt controls. The cabinet mount ensures vibration-free cutting.
The adjustable-angle 10-inch carbide-tipped blade is run by a 15 amp, 1-3/4 HP, 1” V-belt drive motor ,and it is available in 110 v. and 220 v. systems.
The Fusion saw cuts at depths of 3-1/4 inches at 90 degrees or 2-1/4 inches at 45 degrees and it has a maximum 36-in. rip capacity. The newly-designed 5/8-in. arbor is attached to the cabinet top.
It has a 2:1 ratio tilt control with zero backlash, 3-post height adjustment, and spindle lock for quick blade change. The anti-kickback system slows or stops materials when they start to bind.
This hybrid model has an outstanding 4-in. dust collection port that may be attached to any industrial vacuum. The precision camlock T-glide fence ensures accuracy.
Knurled-knob handwheels make fence adjusting easier, and the sturdy and reliable miter gauge has an adjustable 3/4″ x 3/8″ T-slot.
The Laguna Fusion table saw is CSA-certified and meets CSA C22.2 #71.2-08 and UL 987 standards. Standard optional rip blade dado insert zero-clearance insert are available.
PROS
- Portable
- Durable, long-lasting
- 110 v. or 220 v. power
- CSA Certification
- CNC limited warranty; one-yr. manufacturer’s warranty
CONS
- Requires assembly and adjustment
- 110 v. system may “bog down”
Conclusion
Hybrid table saws are the best solution for those that want the features and durability of a cabinet saw but the lighter portability of a contractor’s saw. They are for professionals, hobbyists, workshops, and construction sites. Some stands are solid cabinets while others have wheeled cart stands that are more mobile.
Hybrid table saws cut and rip material of all types and sizes, from hardwood and sheet material to trims and moldings. Not all table saws are heavy and stationary once they are set in place like shop saws. The best hybrid table saws are a cost-effective means of having the best of both a professional and a portable table saw.